Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 28.06.2025 05:51

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

What is the appeal of vampire stories and why are they popular in various forms of media?

These devices are installed between the “hot” and “neutral” and protective ground.

First Sentence:

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

BYU could make noise at NCAA championship 'if big guns show up' - Deseret News

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

so, what happens?

One

What is something you saw while on an airplane that you couldn't believe?

What is lightning?

One is “what exactly is in a ‘surge protector’ ? ”

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Why do liberals think it is okay to steal votes while the rest of us obey the law(s)?

There are two important concepts here.

Upvotes:

Edit 2024–10.

How much can you sell a 10k subscriber newsletter for?

Because the load is inductive, the current lags the voltage.(by a bit).

A circuit breaker is similar, but is resettable.

eight

What are the different types of networking?

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

What is the best soap to use for dogs?

This one hit behind the barn.

At one ohm, the resistor has a maximum of 1 watt power.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

A doctor shares the 7 supplements he takes a day to reduce inflammation, prevent heart disease, and support metabolism - Business Insider

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

So, the voltage could go up to 500 volts, and the fuse will not open up.

In schematic diagrams this is the symbol for a fuse:

Does turmeric help fight cancer? If so, how?

There are three different concepts here that are getting confused.

a photo is worth a thousand words.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

SI cover model Livvy Dunne says she's being stalked in airports by 'middle-aged men' - NBC News

This device then solves the entire problem.

At least they know the answer if they wanted it.

but this device (an Inductor) … impedes the rapid changes in the current.

Fallout 76: Gone Fission Release Notes - Bethesda.net

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

An AC voltage/ current source, and an ac inductive load.

He then describes Rainy Season and Lightning.

Have your parents ever walked in on you?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

2024–10–14 [Omar Gharbi Omar Gharbi ]

But… the neutral is now “floating” because of the 1 ohm resistance.

Voluptatibus nesciunt enim provident in.

The third is lightning and “how it gets conducted into a home.”

It also is a device that limits the change in current flow.

but I think this circuit , shows a few more pieces.

Denise Austin’s 5 Habits to Tackle Stubborn Belly Fat - Eat This Not That

It seems Mohan does not understand the difference between a comment and an Answer.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

I post the exact comment here.

This is where the MOV conducts again, and dissipated the energy.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

[image of Common-mode choke]

2024–10–16 [ OO OLAOYE OYEBODE ]

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

nine

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is 'the assistant's answer'

The bolt then partially travels down the line to your home.

The MOV will conduct when the voltage exceeds 50% of line voltage.

the problem then depends on "how fast does the fuse operate?".

(Dc diagram shown, AC is similar).

For this case there are devices called Metal oxide varistors (MOV).

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Barnstars:

But it can get overloaded, and no longer works.

what exactly is a ‘surge’ protector?

Here is a simplified AC power diagram.

The other is “what does a “fuse” do?”

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

He then describes the function of a fuse.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

2024–10–10[John johnson John Johnson ]

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

A fuse is a non-resetable over current circuit protector.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

He then asserts :

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

These are simplified answers to the original question, and does not change anything I wrote above.

Now when you have a certain ac resistance, then a current flows in a loop.

What does a fuse do?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

[old diagram got deleted by accident]